Expanded Metal
Expanded Metal is used widely throughout the transportation industry, Agriculture, Security,
Machine guards, Floorings, Construction, Architecture and interior design. The use of this kind of mesh is highly beneficial, and of cost saving and low maintenance,ventilation properties,excellent weight-to-strength ratio,economical.
We manufacture a full range of Standard Expanded Metal and Flattened Expanded Metal , structural grating ,micro mesh and decorative patterns.
Raw material of expanded metal can be produced in carbon, galvanized, stainless steel or high strength alloy steel. Certain alloys of copper, brass, bronze and plastics can be expanded as well.
Types of the Expanded Metal:
Expanded diamond;
Expanded Square;
Expanded round;
Expanded Hexagonal.
The materials usually employed for expanded sheets are:
Stainelss steel;
Carbon steel;
Aluminium
Steellong could supply Flattened Expanded Metal Mesh in ss 304 ,Galvanized Expanded Metal Mesh ,PVC Coated Expanded Metal ,Expanded Metal Mesh Panel ,Plain Steel Expanded Metal ,Expanded Metal Screen ,Aluminium Expanded Metal ,Diamond Expanded Metal
Announcement:
- Steellong will do everything possible to provide exact and full product information based on metal mesh for your information.
- In order to give customer a clear image of the product,steellong has taken some pictures, customer can dowmload for reference but using our picture for business is forbidden.
- Due to technique and other factors,product image might be slight different to the products itself,in case everything will follow the products.
- Steellong appreciate any suggestion on our product information or picture or anything else.
|
thickness(m) |
hole width(m) |
hole length(m) |
mesh peduncle |
mesh width(m) |
mesh length(m) |
weight(kg/m2) |
|
0.5 |
2.5 |
4.5 |
0.5 |
0.5 |
1 |
1.8 |
|
0.5 |
10 |
25 |
0.5 |
0.6 |
2 |
0.73 |
|
0.6 |
10 |
25 |
1 |
0.6 |
2 |
1 |
|
0.8 |
10 |
25 |
1 |
0.6 |
2 |
1.25 |
|
1 |
10 |
25 |
1.1 |
0.6 |
2 |
1.77 |
|
1 |
15 |
40 |
1.5 |
2 |
4 |
1.85 |
|
1.2 |
10 |
25 |
1.1 |
2 |
4 |
2.21 |
|
1.2 |
15 |
40 |
1.5 |
2 |
4 |
2.3 |
|
1.5 |
15 |
40 |
1.5 |
1.8 |
4 |
2.77 |
|
1.5 |
23 |
60 |
2.6 |
2 |
3.6 |
2.77 |
|
2 |
18 |
50 |
2.1 |
2 |
4 |
3.69 |
|
2 |
22 |
60 |
2.6 |
2 |
4 |
3.69 |
|
3 |
40 |
80 |
3.8 |
2 |
4 |
5.00 |
|
4 |
50 |
100 |
4 |
2 |
2 |
11.15 |
|
4.5 |
50 |
100 |
5 |
2 |
2.7 |
11.15 |
|
5 |
50 |
100 |
5 |
1.4 |
2.6 |
12.39 |
|
6 |
50 |
100 |
6 |
2 |
2.5 |
17.35 |
|
8 |
50 |
100 |
8 |
2 |
2.1 |
28.26 |
Strand and Bond
Expanded metal is composed of strands and bonds. Strands form the sides of the expanded metal openings. Bonds are where the strands intersect. In other words, the bond is where each diamond shaped opening is connected with the next opening.
SWD (Short Way of the Diamond) is the distance from the middle of the bond on one side to the middle of the bond on the opposite side.
lWD
LWD (Long Way of the Diamond) is the distance across the largest dimension of the diamond measured halfway between the diamonds.
SWO (Short Way of the Opening) is the width of the opening of the shortest side of the diamond. SWO does not include the strand width, where SWD (Short Way of the Diamond) does.
LWO (Long Way of the Opening) is the length of the opening of the longest side of the diamond. LWO does not include the strand width, where LWD (Long Way of the Diamond) does.
Open Area
Expanded metal contains open spaces (the diamond-shaped openings) and material. Open area is the total area of the diamond openings divided by the total area of the sheet or roll of expanded metal and is expressed as a percent. In other words, open area describes how much of the expanded metal is open space. If expanded metal has a 60 percent open area, then 60 percent of the expanded metal is open space and 40 percent is material.
Gauge or Thickness
Thickness is the measurement from the top surface to bottom surface of the expanded metal piece. Gauge is the most common measurement, but thickness can also be measured in fractional inches or millimeters. This gauges and weights chart can provide additional information.
Width and Length
Length is the measure of the longest side of the expanded metal sheet or cut-to-size piece. Width is the measure of the shortest side of the sheet or cut-to-size piece.
Determining SWD, LWD Direction
- Steellong likes to communicate anything on wire cloth and its relevant products with any customers;
- Any of your questions will be answered within 12 hours by professional steellong staff;
- If necessary Please write to our service center at service@steellong.cn, which will pass your question to relevant department.
- The questions which is relevant to customer's business secret,customer's patent,design(model),sample,size,idea,technique will be kept as business secret,Unless permitted, any picture of it is not allowed to be shown in the website and any exhibition is forbidden;
- Customer’s sample/drawing will be returned together with the newly-made sample or the products unless customer’s special instruction;
- If necessary, patent/Intellectual Property Rights Protection Agreement can be signed, responsibility of breaking of the agreement will be taken.
- If you are not satisfied with our service Please write to our general manager at claim@steellong.cn