Reinforcing Fabric is a welded wire fabric, prefabricated steel reinforcement material. It

has a rectangular or square reinforcing fabric mesh grid pattern and is produced in flat sheets.

Reinforcing Fabric sheets are usually 6m long x 2.4m wide as standard and all suppliers make

their reinforcement mesh to similar standards, so one company's reinforcement mesh can be

replaced with another's reinforcement mesh in almost all situations where reinforcment mesh has

been specified or outlined on house plans.

Welcome to contact Steellong for the price and details on the reinforcing fabric sheet or inquir about other wire mesh products.

Bar No. Nominal Dimensions In Inches Weight Per Ft. In Lbs. Diameter In Inches Area Sq. In. Perimeter In Inches 3 0.375 0.11 1.178 0.376 4 0.500 0.20 1.571 0.668 5 0.625 0.31 1.963 1.043 6 0.750 0.44 2.356 1.502 7 0.875 0.60 2.749 2.044 8 1.000 0.79 3.142 2.670 9 1.128 1.00 3.544 3.400 10 1.270 1.27 3.99 4.303 11 1.410 1.56 4.43 5.313 14 1.693 2.25 5.32 7.650 18 2.257 4.00 7.09 13.600

PLAIN WELDED WIRE REINFORCING FABRIC Rolls 60" Wide in Lengths 150 Lineal Feet

Style SPACING WIRES IN INCHES STEEL WIRE GAUGE NO. Wt. Per 100 Sq. Ft. Longitudinal Transverse Longitudinal Transverse *6x6 - 10/10 6 6 10 10 21 *6x6 - 8/8 6 6 8 8 30 *6x6 - 6/6 6 6 6 6 42 *6x6 - 4/4 6 6 4 4 58 *4x4 - 10/10 4 4 10 10 31 *4x4 - 8/8 4 4 8 8 44 *4x4 - 6/6 4 4 6 6 62 *4x4 - 4/4 4 4 4 4 85 2x2 - 16/16 2 2 16 16 13 2x2 - 14/14 2 2 14 14 21 2x4 - 12 1/2/12 1/2 2 4 12 1/2 12 1/2 NA 4x4 - 14/14 4 4 14 14 11

 

Features of reinforcing fabric

• The unique deformed wire pattern (curry pattern) offers superior bonding, improved stress distribution and crack-width control
• Ferro-Fabric is available in a wide range of diameters and apertures. The products can be bent to shape as required
• Manufactured from hard drawn wire (smooth) and cold rolled wire (deformed)
• All intersections are resistant-welded thereby not reducing the tensile strength of the wires
• Mesh has an average shear strength equal to 80% of the wire strength
• The wire used has physical properties which are rigidly controlled to produce mesh with maximum weld strength combined with ductility
• The steel specifications allow for cold rolled wire with a minimum ultimate tensile strength of 510Mpa and a high resistance to fatigue
• Mesh is available in black (pre-galvanised) and galvanised sheets or rolls
• Also available on request: plastic coated and hot dipped (galvanised) mesh