Plastic Coated Wire Fence Panels
Plastic Coated Wire Fence Panels is made of high quality of welded galvanized iron wire mesh, to be coated with PVC powder by advanced automatic equipments.
Plastic Coated Wire Fence Panels:Characteristics
Beautifying the environment, solid and durable, not easy to fade,anti-corrosion anti-aging anti-sun and so on
Fence panels are the major components of the fence system composing of different materials offering complete different features.
Plastic Coated Fence Panels are suitable for garden fences,security fences,decorative fences,stadium fences. All kinds of colors can be coated according to customers' special requirements.
Announcement:
- Steellong will do everything possible to provide exact and full product information based on metal mesh for your information.
- In order to give customer a clear image of the product,steellong has taken some pictures, customer can dowmload for reference but using our picture for business is forbidden.
- Due to technique and other factors,product image might be slight different to the products itself,in case everything will follow the products.
- Steellong appreciate any suggestion on our product information or picture or anything else.
Thanks for your visiting our website.
Steellong are capable of producing the products as your specifications and design.
Welcome to contact us for our popular products in stock or inform us your specification.
Our experienced engineer and sales will make a quick reply.
How to Install Fence Panels?
1.Check for underground utilities. This is important before you start digging holes for the fence posts because power, fiber-optic or other cables may be present around the area of your fence.
2.Mark your fence line. First you must decide where you wish to erect the terminal posts and gate, the bay area (the spaces between the posts) and where you will install the plastic coated fence panels. To do this, run a roll of string along the imaginary perimeter of your fence, taking into account all fence corners.
3.Review your marked fence line. Before proceeding, check the fence line that you marked with string earlier to ensure that you have included markings for the fence gate and all corners. Make the necessary adjustments where required. When planning all bay areas, you may decide whether to set up an infill for privacy, or a series of rails.
4.Mark the corner posts' locations. When you have reviewed your fence line and have made all necessary adjustments to your satisfaction, tie a string between the 4x4 corner post locations. Then finalize the measurements of your plastic coated fence panels accordingly.
5.Apply the measured panels. When you have measured the length of your panels, use a stake in the ground to apply them to the line posts' location. For example, for 6 foot panels set up 5 inch x 5 inch posts. Make sure the stakes are in physical contact with the layout string marker in order to keep the posts aligned. When doing so, keep in mind where the gates or other breaks in the fence are supposed to be.
6.Dig final holes for fence posts. Before you do so, you must decide what height you wish to have your fence and dig the holes to a suitable depth accordingly. A diameter of 10 inches is advised when digging your post holes. Now pour 6 inches of gravel into each hole.
7.Fill all post holes with concrete. Follow instructions regarding the drying process and use of the concrete, before you do this.
8.Insert posts into concrete. Use a mallet or hammer to tap the posts down into position and ensure they are aligned. Before the concrete dries, make any necessary adjustments.
9.Install plastic coated panels. Attach rail brackets to the fence posts, then, slot the panels into these brackets. Use bolts and screws to fasten the panels to the hangers.
10.Install the gate. When doing this, ensure that the gate and fence are aligned at the bottom. Leave about 5/8 inch space between the gate and the two posts on either side of it.
- Steellong likes to communicate anything on wire cloth and its relevant products with any customers;
- Any of your questions will be answered within 12 hours by professional steellong staff;
- If necessary Please write to our service center at service@steellong.cn, which will pass your question to relevant department.
- The questions which is relevant to customer's business secret,customer's patent,design(model),sample,size,idea,technique will be kept as business secret,Unless permitted, any picture of it is not allowed to be shown in the website and any exhibition is forbidden;
- Customer’s sample/drawing will be returned together with the newly-made sample or the products unless customer’s special instruction;
- If necessary, patent/Intellectual Property Rights Protection Agreement can be signed, responsibility of breaking of the agreement will be taken.
- If you are not satisfied with our service Please write to our general manager at claim@steellong.cn