250 mesh Stainless Steel Mesh T304 wire dia. 0.0406mm
Stainless steel mesh is the most popular woven screen in the industrial world.
Stainless steel mesh is known for its corrosion resistance and strength.
The Features Of Stainless Steel Mesh:
- For filtration, screening or grading.
- Accurate pore size
- Wide range of aperture sizes
- Can be treated with cleansing agents and air blasted for a longer life.
- Can be resistant to many chemicals
Stainless steel mesh and wire cloth is use where clean long lasting vents, filters, or grilles
are need .These meshes are used for sorting and screening of abrasives, liquids, powders and
other solids. It is the less expensive, stronger, but not as corrosion resistant as T316.
Wire mesh having a mesh count greater than 90 x 90 is referred to as Fine Mesh. This group of wirecloth specifications is typically available in Stainless Steel. Monel or Nickel may be woven to order.
Steellong can offer wide range of woven wire mesh dependents on the configuration of wire thickness in relation to aperature size, as well as type of weaves, and can vary in texture from being as fine, soft and flexible as silk to being as rigid as steel plate. Stainless steel mesh is available in rolls or in cut circles and also as fabricated filters.
Steellong could supply 180 mesh Stainless Steel Mesh T304L ,150 mesh Stainless Steel Mesh T304 ,120 mesh Stainless Steel Mesh T316L ,100 mesh Stainless Steel Mesh T316L ,100 mesh Stainless Steel Mesh T304L
Announcement:
- Steellong will do everything possible to provide exact and full product information based on metal mesh for your information.
- In order to give customer a clear image of the product,steellong has taken some pictures, customer can dowmload for reference but using our picture for business is forbidden.
- Due to technique and other factors,product image might be slight different to the products itself,in case everything will follow the products.
- Steellong appreciate any suggestion on our product information or picture or anything else.
Thanks for your visiting our website.
Steellong are capable of producing the products as your specifications and design.
Welcome to contact us for our popular products in stock or inform us your specification.
Our experienced engineer and sales will make a quick reply.
Wire mesh and cloth consists of metal wires woven or knitted into a grid or screen pattern with openings determined by the mesh size or linear density of wires (wire per inch). A larger mesh size number indicates smaller openings. A 325 mesh product has a nominal sieve opening size of 44 microns while a 100 mesh screen has a nominal opening size of 149 microns.
Woven wire mesh and cloth is a grid of individual metal wires woven over and under other wires that are positioned at 90° angles to each other. Wire cloth products include a broad range of design specifications, which consist of a variety of weave styles, wire diameters and types of materials. Wire mesh and cloth weave styles are 10-mesh or finer and woven typically of smooth, drawn wires which are force-crimped into place during the weaving process. Common weave styles for wire mesh and cloth include plain woven, twill, and plain Dutch, as well as variants such as Dutch twill, reverse Dutch, twill Dutch double, stranded, and pre-crimped weave.
Plain woven is the most popular wire mesh and cloth weave. Each weft wire passes alternately over and under each warp wire, and each warp wire passes alternately over and under each weft wire. Generally, the warp and weft wire diameters are the same. In twill wire cloth, each warp wire and each shute wire passes successively over and under the two adjacent wires - in both the warp and shute directions. This over and under movement is shifted one wire with each pass of the shuttle. This pattern permits the weaving of heavier wires in varying meshes. Each weft wire alternately passes over two, then under two successive warp wires; each warp wire passes alternately over two and under two successive weft wires, in a staggered arrangement. Twill weave is used to allow a heavier than standard wire diameter in association with a given mesh.
Plain Dutch wire mesh and cloth weave has a similar interlacing to plain weave, but the warp wires have a larger diameter than the shute wires. The lighter shute wires are driven up close, thus forming a dense filtering-medium. This weave displays a tapered or wedge-shaped opening. While the warp wires remain straight, the weft wires are plain-woven to lie as close as possible against each other in a linen weave, forming a dense strong material with small, irregular and twisting passageways that appear triangular when the weave is viewed diagonally.
Wire mesh and cloth can be woven from many different materials, but the application requirements determine the best selection. Some of the most common wire mesh and cloth materials include steel and stainless steel, nickel-based alloys, aluminum, brass, copper, bronze, titanium, molybdenum, tantalum and tungsten. Specialty and custom materials, weaves and cloth grades can be worked out with the wire mesh and cost supplier.
Knitted mesh is a nonwoven wire mesh or cloth product. Knitted wire mesh or cloth is manufactured using a knitting process where the mesh is formed from a series of interlocking loops. The loop structure gives knitted cloth greater in plane springiness or two dimensional flexibility compared to woven mesh or fabric. Knitted mesh can be crimped or compressed to alter characteristics for specific applications.
Steellong manufactures all kinds of wire mesh and cloth products, please call us or email us for your needs.
- Steellong likes to communicate anything on wire cloth and its relevant products with any customers;
- Any of your questions will be answered within 12 hours by professional steellong staff;
- If necessary Please write to our service center at service@steellong.cn, which will pass your question to relevant department.
- The questions which is relevant to customer's business secret,customer's patent,design(model),sample,size,idea,technique will be kept as business secret,Unless permitted, any picture of it is not allowed to be shown in the website and any exhibition is forbidden;
- Customer’s sample/drawing will be returned together with the newly-made sample or the products unless customer’s special instruction;
- If necessary, patent/Intellectual Property Rights Protection Agreement can be signed, responsibility of breaking of the agreement will be taken.
- If you are not satisfied with our service Please write to our general manager at claim@steellong.cn