Steellong offers a range of Stainless Filter Cloth from 10 micron to the heavy industrial meshes with big apertures. Special weaves for intense filter cloth applications can also be supplied.

300 mesh Stainless Filter Cloth--Material:

Stainless steel AISI 304, 304L, 316, 316L, 310, etc.


300 mesh Stainless Filter Cloth--Size:
width:1m or 1.2m
length:30m
wire dia.0.0381mm
hole dia.0.0457mm
Custom order accepted.

Weaving Pattern: Plain weave and Twill weave

Character: acid-resisting,alkali-resisting,heat-resisting,corrosion-resisting

Uses: Sieve and filter in the acid and alkali environment. Stainless steel wire mesh is used as sieve mesh in petroleum industry; as filter-mesh in chemical industry; also used in galvanized industry.

Stainless Steel Woven Wire Mesh is economical for industrial, agricultural and some residential uses. 

Steellong Wire Cloth Co., Ltd. can provide Stainless Woven Wire Cloth,Micron Filtering Mesh 100x100 ,Micron Wire Cloth ,Micron Filter Cloth ,Filter Cloth ,Woven Filter Wire Cloth ,Square Opening Wire Cloth ,Micronic Filter Cloth ,325 mesh Stainless Steel Wire Cloth ,Fine Stainless Wire Cloth

mesh	Wire dia		Hole dia		Opening area	Weight/squinch
	inch	mm	inch	mm
3x3	0.054	1.37	0.279	7.09	70.1	56.7
4x4	0.063	1.6	0.187	4.75	56	104.8
6x6	0.035	0.89	0.132	3.35	32.7	48.1
8x8	0.028	0.71	0.097	2.46	60.2	41.1
10x10	0.02	0.51	0.08	2.03	64	26.1
12x12	0.02	0.508	0.063	1.6	57.2	31.6
16x16	0.018	0.457	0.0445	1.13	50.7	34.5
18x18	0.017	0.432	0.0386	0.98	48.3	34.8
24x24	0.014	0.356	0.0277	0.7	44.2	31.8
30x30	0.013	0.33	0.0203	0.52	37.1	34.8
35x35	0.011	0.279	0.0176	0.45	37.9	29
50x50	0.009	0.229	0.011	0.28	30.3	28.4
60x60	0.0075	0.191	0.0092	0.23	30.5	23.7
80x80	0.0055	0.14	0.007	0.18	31.4	16.9
90x90	0.005	0.127	0.0061	0.16	30.1	15.8
100x100	0.0045	0.114	0.0055	0.14	30.3	14.2
120x120	0.0037	0.094	0.0064	0.1168	30.7	11.6
150x150	0.0026	0.066	0.0041	0.1041	37.4	7.1
160x160	0.0025	0.0635	0.0038	0.0965	36.4	5.94
200x200	0.0021	0.0533	0.0029	0.0737	33.6	6.2
270x270	0.0016	0.0406	0.0021	0.0533	32.2	4.7
300x300	0.0051	0.0381	0.0018	0.0457	29.7	3.04

Material for weaving stainless steel wire mesh ( wire cloth ) is divided into Type 304, Type 304 L, Type 316 and Type 316 L.

Type 304 :
Often referred to as "18-8" ( 18% chromium, 8% nickel ) T-304 is the basic stainless alloy most commonly utilized for wire cloth weaving. It withstands outdoor exposure without rusting and resists oxidation at an elevated temperature up to 1400 Degrees Fahrenheit.

Stainless steel wire mesh contains chromium and nickel in addition to steel. It is non-magnetic in the annealed condition. After stainless steel wire mesh has been woven, it may become slightly magnetic due to cold working.

Type 304 L :
Type 304 L is very similar to T-304, the difference being the reduced carbon content for better weaving and secondary welding characteristics.

Type 316 :
Stabilized by the addition of 2% molydbenum, T-316 is an "18-8" alloy.

Type 316 has better resistance to pitting corrosion than the other chromium-nickel stainless steels where brines, sulphur-bearing water or halogen salts, such as chlorides are present. A valuable property of T-316 is high creep strength at elevated temperatures. Other mechanical properties and fabricating characteristics are similar to T-304.