Galvanized Woven Wire Mesh
Galvanized woven wire mesh is a stiff material but may be bent by hand and has little spring back after being bent or formed. All of the meshes maybe folded completely over without breaking.
Galvanized after weaving
Steel Wire Cloth of 8 mesh and coarser can be galvanized after weaving with a heavy coating of zinc to provide protection against corrosion. The coating is applied by dipping the wire cloth into a bath of melted zinc. The zinc locks the wires in place at their intersections.
Galvanized before weaving
Fine wire can be galvanized before weaving, for there is no welding spots,so it will not influence its appreance as well as use. So for the fine wire mesh, we recommend you the galvanized before weaving one.
Steellong manufacture galvanized woven wire mesh which is typically used in rubber industry. We provide cut-to-size services,welcome to contact Steellong for the wire mesh you interested in.
Steellong could supply Stainless Woven Wire Cloth,Galvanized Hardware Cloth ,Electro Galvanized Welded Wire Mesh ,Industrial Corrosion Resistant Wire Cloth ,Galvanized Welded Cloth ,Square Mesh Plain Weave ,Reverse Dutch Wire Mesh ,Stainless Woven Wire Mesh
Announcement:
- Steellong will do everything possible to provide exact and full product information based on metal mesh for your information.
- In order to give customer a clear image of the product,steellong has taken some pictures, customer can dowmload for reference but using our picture for business is forbidden.
- Due to technique and other factors,product image might be slight different to the products itself,in case everything will follow the products.
- Steellong appreciate any suggestion on our product information or picture or anything else.
|
mesh |
Wire dia |
Hole dia |
Opening area |
Weight/squinch |
|
inch |
mm |
inch |
mm |
|
3x3 |
0.054 |
1.37 |
0.279 |
7.09 |
70.1 |
56.7 |
|
4x4 |
0.063 |
1.6 |
0.187 |
4.75 |
56 |
104.8 |
|
6x6 |
0.035 |
0.89 |
0.132 |
3.35 |
32.7 |
48.1 |
|
8x8 |
0.028 |
0.71 |
0.097 |
2.46 |
60.2 |
41.1 |
|
10x10 |
0.02 |
0.51 |
0.08 |
2.03 |
64 |
26.1 |
|
12x12 |
0.02 |
0.508 |
0.063 |
1.6 |
57.2 |
31.6 |
|
16x16 |
0.018 |
0.457 |
0.0445 |
1.13 |
50.7 |
34.5 |
|
18x18 |
0.017 |
0.432 |
0.0386 |
0.98 |
48.3 |
34.8 |
|
24x24 |
0.014 |
0.356 |
0.0277 |
0.7 |
44.2 |
31.8 |
|
30x30 |
0.013 |
0.33 |
0.0203 |
0.52 |
37.1 |
34.8 |
|
35x35 |
0.011 |
0.279 |
0.0176 |
0.45 |
37.9 |
29 |
|
50x50 |
0.009 |
0.229 |
0.011 |
0.28 |
30.3 |
28.4 |
|
60x60 |
0.0075 |
0.191 |
0.0092 |
0.23 |
30.5 |
23.7 |
|
80x80 |
0.0055 |
0.14 |
0.007 |
0.18 |
31.4 |
16.9 |
|
90x90 |
0.005 |
0.127 |
0.0061 |
0.16 |
30.1 |
15.8 |
|
100x100 |
0.0045 |
0.114 |
0.0055 |
0.14 |
30.3 |
14.2 |
|
120x120 |
0.0037 |
0.094 |
0.0064 |
0.1168 |
30.7 |
11.6 |
|
150x150 |
0.0026 |
0.066 |
0.0041 |
0.1041 |
37.4 |
7.1 |
|
160x160 |
0.0025 |
0.0635 |
0.0038 |
0.0965 |
36.4 |
5.94 |
|
200x200 |
0.0021 |
0.0533 |
0.0029 |
0.0737 |
33.6 |
6.2 |
|
270x270 |
0.0016 |
0.0406 |
0.0021 |
0.0533 |
32.2 |
4.7 |
|
300x300 |
0.0051 |
0.0381 |
0.0018 |
0.0457 |
29.7 |
3.04 |
The difference between Galvanized Before and Galvanized After welded and woven wire mesh and fence
Galvanized Before Weld or weave
GBW fence and mesh are made from strands of galvanized wire. The wires used can be any gauge. After being drawn down to the final diameter, the wire is galvanized - coated with zinc. The wires are then welded or woven together. During the welding process the protective layer of zinc is burnt off. This leaves the wire unprotected at the welded joint where the wires cross. When the wires are woven, the galvanizing is not affected. However in the meshes that are tightly woven with several twists, such as hex netting chicken wire fence, the woven area where the wires intersect is a vulnerable area.
When GBW meshes and fencing are used outside and exposed to the elements, rain or any corrosive liquid will collect at these vulnerable spots. Rust and corrosion will start to eat at the wire, weakening the mesh and fence, limiting its lifetime. There is a wide variety of mesh opening sizes made. Some fences with the same openings are available in a variety of gauges.
GBW fences and mesh features -
· economical
· limited lifetime, unless used inside or in other protected locations
· heavier gauge outlasts lighter gauge - 12-1/2 gauge lasts longer than 14 gauge
· available in a wide variety of gauge and mesh combinations
· temporary fence
· concrete reinforcement
· indoor storage area partitions
Galvanized After Weld or weave
GAW mesh and fencing will last a long time. After the wires are either welded or woven into a mesh, the entire finished product is drawn through a bath of molten zinc. The GAW mesh emerges with a thick coating tightly bonded to the wire. Each strand of wire is protected. More importantly, each vulnerable welded or woven area is thoroughly sealed.
GAW fences and mesh are ideal for use in any area where exposure to water and other corrosive substances will be expected. The extra zinc of the galvanized after mesh and fence guarantees a longer lifetime than galvanized before products. Meshes and fence are more costly than galvanized before. GAW specifications are available in a wide selection of gauges and mesh opening sizes.
GAW fences and mesh features -
· long lifetime - resistant to rust and corrosion
· wires and welded or woven spots are thoroughly galvanized
· available in different gauges and mesh sizes
· salt water use
· small animal cages
· greenhouse benches
· in-ground wire for groundhog barriers and bird pens
- Steellong likes to communicate anything on wire cloth and its relevant products with any customers;
- Any of your questions will be answered within 12 hours by professional steellong staff;
- If necessary Please write to our service center at service@steellong.cn, which will pass your question to relevant department.
- The questions which is relevant to customer's business secret,customer's patent,design(model),sample,size,idea,technique will be kept as business secret,Unless permitted, any picture of it is not allowed to be shown in the website and any exhibition is forbidden;
- Customer’s sample/drawing will be returned together with the newly-made sample or the products unless customer’s special instruction;
- If necessary, patent/Intellectual Property Rights Protection Agreement can be signed, responsibility of breaking of the agreement will be taken.
- If you are not satisfied with our service Please write to our general manager at claim@steellong.cn