Plain Weave Wire Cloth
Plain Weave - wire cloth woven so that each shute wire passes alternately under and over successive warp wires and each warp wire passes alternately over and under successive shute wires. Mesh count in warp and shute directions can be different.
The Plain Weave is the most commonly used and simplest wire cloth weave. Each warp wire (wire running-parallel to length of cloth) passes alternately over and under the wires running traversely through the cloth (fill or shoot wires) at 90 degree angles. It has an extremely wide range of applications.
Square Weave - wire cloth woven with the same diameter warp and shute wires which has equal wire spacing to produce square openings and straight through flow path
Uses: Sieve and filter in the acid and alkali environment. Stainless steel wire mesh is used as sieve mesh in petroleum industry; as filter-mesh in chemical industry; also used in galvanized industry.
Steellong Wire Cloth Co., Ltd. can produce all kinds of Plain Weave Wire Cloth products according to the customers' requirements
Announcement:
- Steellong will do everything possible to provide exact and full product information based on metal mesh for your information.
- In order to give customer a clear image of the product,steellong has taken some pictures, customer can dowmload for reference but using our picture for business is forbidden.
- Due to technique and other factors,product image might be slight different to the products itself,in case everything will follow the products.
- Steellong appreciate any suggestion on our product information or picture or anything else.
|
Meshes per Linear inch |
Diameter of wire |
Width of opening |
Open area percent(%) |
Weight(stainless steel) |
|
inch |
mm |
inch |
mm |
100sq.feet
(bls.) |
1sq. meter
(kg) |
|
100
105
110
120
150
160
180
200
250
325
370
400 |
.0045
.0030
.0040
.0037
.0026
.0025
.0023
.0021
.0016
.0011
.0011
.0009 |
.114
.076
.102
.094
.066
.064
.058
.053
.041
.028
.028
.023 |
.0055
.0065
.0051
.0046
.0041
.0038
.0033
.0029
.0024
.0020
.0016
.0016 |
.140
.065
.130
.117
.104
.097
.084
.074
.061
.051
.041
.041 |
30.2
46.6
31.5
30.5
37.8
37.0
35.3
33.6
36.0
42..2
35.0
41.0 |
14.20
5.72
12.40
10.20
7.10
7.00
6.70
6.30
4.60
2.86
2.96
2.16 |
.69
.28
.61
.50
.35
.34
.33
.31
.22
.14
.14
.11 |
Material for weaving stainless steel wire mesh ( wire cloth ) is divided into Type 304, Type 304 L, Type 316 and Type 316 L.
Type 304 :
Often referred to as "18-8" ( 18% chromium, 8% nickel ) T-304 is the basic stainless alloy mostly
commonly utilized for wire cloth weaving. It withstands outdoor exposure without rusting and resists oxidation at an elevated temperature up to 1400 Degrees Fahrenheit.
Typical wire cloth applications include use with chemicals, food products, pharmaceuticals and exposure to moisture.
Type 304 L :
Type 304 L is very similar to T-304, the difference being the reduced carbon content for better weaving and secondary welding characteristics.
Type 316 :
Stabilized by the addition of 2% molydbenum, T-316 is an "18-8" alloy.
Type 316 has better resistance to pitting corrosion than the other chromium-nickel stainless steels where brines, sulphur-bearing water or halogen salts, such as chlorides are present. A valuable property of T-316 is high creep strength at elevated temperatures. Other mechanical properties and fabricating characteristics are similar to T-304.
Wire cloth woven of T-316 has extensive use in chemical processing when better corrosion resistance is required than the regular chromium-nickel types.
Type 316 L :
Type 316 L is very similar to T-316, the difference being the reduced carbon content for better wire cloth weaving and secondary welding characteristics.
- Steellong likes to communicate anything on wire cloth and its relevant products with any customers;
- Any of your questions will be answered within 12 hours by professional steellong staff;
- If necessary Please write to our service center at service@steellong.cn, which will pass your question to relevant department.
- The questions which is relevant to customer's business secret,customer's patent,design(model),sample,size,idea,technique will be kept as business secret,Unless permitted, any picture of it is not allowed to be shown in the website and any exhibition is forbidden;
- Customer’s sample/drawing will be returned together with the newly-made sample or the products unless customer’s special instruction;
- If necessary, patent/Intellectual Property Rights Protection Agreement can be signed, responsibility of breaking of the agreement will be taken.
- If you are not satisfied with our service Please write to our general manager at claim@steellong.cn