Steellong can offer wide range of woven wire cloth dependents on the configuration of wire thickness in relation to aperature size, as well as type of weaves, and can vary in texture from being as fine, soft and flexible as silk to being as rigid as steel plate. Fine Wire Mesh is available in rolls or in cut circles and also as fabricated filters.
Material for weaving stainless steel wire mesh ( wire cloth ) is divided into Type 304, Type 304 L, Type 316 and Type 316 L.

Steellong specializes in fine stainless steel woven mesh

Technical Note:

Standard roll width: 1m,1.2m

Standard roll length: 15m and 30m

Material: S.S 304N/316l/304HP

If you can envision it,We can supply it. TEL:0086-318-7979121 E-mail:sales@steellong.cn MSN：Service@Steellong.Cn

• Steellong will do everything possible to provide exact and full product information based on metal mesh for your information.
• In order to give customer a clear image of the product,steellong has taken some pictures, customer can dowmload for reference but using our picture for business is forbidden.
• Due to technique and other factors,product image might be slight different to the products itself,in case everything will follow the products.
• Steellong appreciate any suggestion on our product information or picture or anything else.

Material for weaving stainless steel wire mesh ( wire cloth ) is divided into Type 304, Type 304 L, Type 316 and Type 316 L.

Type 304 :
Often referred to as "18-8" ( 18% chromium, 8% nickel ) T-304 is the basic stainless alloy mostly
commonly utilized for wire cloth weaving. It withstands outdoor exposure without rusting and resists oxidation at an elevated temperature up to 1400 Degrees Fahrenheit.

Typical wire cloth applications include use with chemicals, food products, pharmaceuticals and exposure to moisture.

Type 304 L :

Type 304 L is very similar to T-304, the difference being the reduced carbon content for better weaving and secondary welding characteristics.

Type 316 :

Stabilized by the addition of 2% molydbenum, T-316 is an "18-8" alloy.

Type 316 has better resistance to pitting corrosion than the other chromium-nickel stainless steels where brines, sulphur-bearing water or halogen salts, such as chlorides are present. A valuable property of T-316 is high creep strength at elevated temperatures. Other mechanical properties and fabricating characteristics are similar to T-304.