Stainless Steel Cloth Discs
Steellong can offer cut pieces of any size and quantity using whatever material that you require.
These can be packed in quantities according to your specifications and we will strive to ensure your product reaches you damage free.
There are numerous uses for cut pieces, they could be used for filters or grills for beehives for example, or sieves.
Steellong offer a range of sizes from 1mm up to 100mm in diameter using any of the material we have listed.
They can be packed in any quantity requested by you.
There is a vast range of uses for discs, they are used in some plastic extrusion, pipe work and lighting for example.
As the mesh we supply can be cut to any size and some of the materials can be manipulated very easily there is an enormous range of tasks that mesh can be used for.

Application:mainly used in rubber,plastics,cereals and oil screening industry

Material:stainless steel wire woven mesh,black cloth,galvanized wire netting and other metals.

Layer: monolayer, multilayer

Shape: round, rectangle

Stainless Steel Cloth Slitting
We are capable of manufacturing various stainless steel wire cloth discs, including different shapes and layers, which could meet your specific requiements.
We will cut anything in our inventory to your specifications. In some cases we have to charge for the entire stock size piece but we will always ask if we should ship the drops along with the finished part.

If you can envision it,We can supply it. TEL:0086-318-7979121 E-mail:sales@steellong.cn MSN：Service@Steellong.Cn

• Steellong will do everything possible to provide exact and full product information based on metal mesh for your information.
• In order to give customer a clear image of the product,steellong has taken some pictures, customer can dowmload for reference but using our picture for business is forbidden.
• Due to technique and other factors,product image might be slight different to the products itself,in case everything will follow the products.
• Steellong appreciate any suggestion on our product information or picture or anything else.

Wire Cloth Definitions
Bolting Cloth - A roup of industrial wire cloth specs of stainless steel or monel with plain square mesh pattern. Wire diameter is lighter than Mill Grade. Typically high percentage of open area.
Calender- To pass wire cloth through a pair of rollers to reduce thickness or flatten intersections of wires and provide a smooth surface. Also called rolled.
Coarse Mesh - Wire with mesh count of less than 30x30.
Count - Applies only to Mesh cloth - the number of openings per linear inch, measured from the center of any wire.
Crimp - Indentationon wire to provide a locking surface for perpendicular wires. Reduces deformation of hole size and shape.
Fill Wires - See Shute.
Filter Cloth - Wire cloth for filtration and straining. Usually an off-count with a different wire diameter in the warp than in the shute. The opening size is usually expressed in microns.
Fine Mesh - Wire cloth with mesh count of 90x90 and higher.
Gauge - The wire dameter. In the wire industry, 'gauge' is not synonymous with the various gauge numbers assigned arbitrarily by certain authorities.
Hard Wire - Wire drawn to a smaller size after annealing.
Market Grade Wire Cloth - a group of industrial wire cloth specifications selected for general purpose work. These range from a 2x2 mesh/.63wire/.437 opening to a 635x635mesh/.0008 wire. Wire diameters are slightly larger than Mill Grade or Tensil Bloting Cloth. Market grade specifications are generally considered 'stock' and available off-the-shelf.
Medium Mesh - Wire Cloth with mesh count of 30x30 through 90x90.
Mesh - The number of openings per linear inch, measured from the center of any wire. Larger openings are listed as fractions (5/8" to 1") which is the distance between the centers of two adjacent wires.
Micron - One mcron equals .00003937 inch or .001 mm. A unit of measurement of particle retentions of filter media.
Open Area - Open area as a percentage of total coverage of cloth. 1x1 space cloth ranges from 44.4 to 70.7%. 1x1 mesh cloth ranges from 44.8 tp 86.1%.
Off-Count - Wire cloth where mesh count of the shute wires differs from (usually less than) the warp. shute wire diameter may be different from the warp wire (usually lighter).
Raw Edge - Unfinished edge running the length of the screen. "Sealedge" - Cut edges are smoothed and sealed against fraying. Applicable to certain medium to fine meshes.
Salvage - A finished, woven edge running the length of the roll. Prevents unraveling. Also called loop edge.
Shute - The cross wires, carried back and forth by the shuttles. Also called the Fill and Weft wire.
Space - The distance or open spave between the facing edges of two adjacent parallel wires.
Space Cloth - Wire cloth selected according to clear open distance measured from the facing edges of two adjacent wires (warp and shute), regardless of wire diameter.
Square Mesh - Wire cloth having the same mesh count and wire diameter in boith the warp and shute directions.
Testing Sieves - Stainless steel or brass round frames with extremely accurate openings. Wire cloth is usually of stainless steel, brass or phosphor-bronze with non standard wire diameters.
Warp - Wires running lengthwise with the cloth. In waving, Warp wires are set first, at the desired spacing, in a procedure called warping the loom.
Weft Wire - see shute.

Typical wire cloth applications include use with chemicals, food products, pharmaceuticals and exposure to moisture.

Type 304 L :

Type 304 L is very similar to T-304, the difference being the reduced carbon content for better weaving and secondary welding characteristics.

Type 316 :

Stabilized by the addition of 2% molydbenum, T-316 is an "18-8" alloy.

Type 316 has better resistance to pitting corrosion than the other chromium-nickel stainless steels where brines, sulphur-bearing water or halogen salts, such as chlorides are present. A valuable property of T-316 is high creep strength at elevated temperatures. Other mechanical properties and fabricating characteristics are similar to T-304.

Wire cloth woven of T-316 has extensive use in chemical processing when better corrosion resistance is required than the regular chromium-nickel types.

Type 316 L :

Type 316 L is very similar to T-316, the difference being the reduced carbon content for better wire cloth weaving and secondary welding characteristics.