Steellong produces a variety of Expanded Aluminum Metal in standard, heavy, flattened

or special patterns, designs, sizes for customers choices. You are always welcome to contact us with your most specific requirements.

Aluminium Expanded Metal is sheet metal that has been slit and expanded up to ten times its original width. The formation of the diamond-shaped pattern adds to the strength and rigidity of the sheet. This material offers savings in weight and metal, free passage of light and air, and a decorative or ornamental effect
 
 
Aluminium Expanded Metal we offered is further divided into different grades:

Expanded Aluminum Metal, Standard Rhombic Shaped
Expanded Aluminum Metal, Heavy Type (Tortoise-shaped)
Expanded Aluminum Metal, Flattended Type
Micron Expanded Metal in Aluminum Foil
Expanded Aluminum Metal, Special Types

Aluminium Expanded Metal Features 
• Lightweight
• Economical
• Slip-resistant surface
• Low Maintenance
• Can be bent or formed in any direction
• U-edging for finished edges

If you can envision it,We can supply it.   TEL:0086-311-87878922 E-mail:sales@steellong.cn MSN：Service@Steellong.Cn

• Steellong will do everything possible to provide exact and full product information based on metal mesh for your information.
• In order to give customer a clear image of the product,steellong has taken some pictures, customer can dowmload for reference but using our picture for business is forbidden.
• Due to technique and other factors,product image might be slight different to the products itself,in case everything will follow the products.
• Steellong appreciate any suggestion on our product information or picture or anything else.

Cleaning - Carbon expanded metal is lightly oiled and should be cleaned before finishing. The most common cleaning method is an acid or solvent bath with a water rinse. For aluminum, use a non-etching chemical or detergent, then rinse and dry thoroughly.

Anodizing - A surface treatment for aluminum where an oxide coating is added electrochemically to the metal. For interior abrasion resistance a .0025" coating is necessary. Medium abrasion applications for interior or maintained exteriors need a .0004" coating. Use a .0008" coating for exteriors.
Porcelain Enamel - Porcelain enamels can be readily applied to expanded metal. Forming, cutting, welding and drilling should be done before applying the finish. All surfaces should be covered.
Painting, Lacquering, Plastic Coating - Be sure the coating used has good surface tension or wetting properties and viscosity to prevent any pullback from metal edges and webbing-in of diamonds