Crimped wire cloth is identified from a wire crimped only in the points of intersection, before weaving. Crimped wire cloth is only made on request and the wire used may be round or square.

Product Features
Crimped wire cloth offers great dimensional strength and stability, great resistance to abrasion, uniform openings and excellent anticorrosion. It is usually used as quarry screen in mine, quarry and other industrial fields as sieving, grading and separating screening materials.

Basic parameters:

Aperture width: 10 - 120 mm in the case of multi-notch meshes and
4 - 40 mm in the case of single-notch meshes.
Wire diameter: 1.0 - 5.5 mm
Mesh width: up to 2000 mm
Crimped wire mesh is supplied in the form of sheets.

If you can envision it,We can supply it.   TEL:0086-311-87878922 E-mail:sales@steellong.cn MSN：Service@Steellong.Cn

• Steellong will do everything possible to provide exact and full product information based on metal mesh for your information.
• In order to give customer a clear image of the product,steellong has taken some pictures, customer can dowmload for reference but using our picture for business is forbidden.
• Due to technique and other factors,product image might be slight different to the products itself,in case everything will follow the products.
• Steellong appreciate any suggestion on our product information or picture or anything else.

The production process of crimped mesh?

Employed for coarser wire meshes, usually ½" mesh or coarser.
First, the number of wires to make up the width of the roll is calculated (the warp wires). The wire is run through a series of gears (crimping wheels) to achieve the desired crimp, such as intermediate, lock, or smooth top. If the roll is 100 feet in length, the wire is crimped, then the required number of warp wires are cut to 100 ft lengths. The wires are threaded through slots on the loom to keep them the proper distance apart. Next, the number of wires to make up the length is calculated (the fill wires). The fill wire is run through the crimping wheels and the required number of fill wires are cut to size. If the roll is to be 36" wide, the fill wires are cut to 36" lengths. The fill wires are fed across the warp wires, over one wire, under the next one, and so on, one fill wire at a time, until the roll is complete.